Kidde Alarmline LWM-1, SenseTek introduces the linear thermal detection system.
The system includes a controller unit and your choice of the length of the sensor cable. The Kidde Alarmline thermal detection system does not only warn you at a maximum alarm temperature, but also when there is a fast increase in temperature (rate of rise) so that a fast detection is guaranteed.
The Kidde Alarmline system is completely programmable with DIL switches, without the need for a laptop computer. This means a very rapid commisioning period. The Alarmline system meets the standards of detector rating A1, A2, B, C and P. The system can be used with certified fire alarm systems because of it being certified by VdS with EN54-5:2000 certification.
The specifications for the Alarmline thermal detection system are:
- Can be installed up to 7.5 meters.
- Maximum cable length of 300 metres within EN54-5 specifications
- Unlikely of false alarms even in polluted areas
- Sensor cable is easy to install
- Special coated sensor cable for durability
- Controller can be installed up to 500 meters from the sensor cable
- Easy to maintain system
- Can be installed in explosive environments
Alarmline cable and its associated controllers allow integration with many fire alarm and extinguishing control systems offering a complete system solution.
The use of ATEX approved junction boxes and Intrinsically Safe barriers enable the Alarmline system to be used in hazardous areas.
Alarmline Digital is a twin conductor cable with temperature sensitive insulation protecting the inner conductors. Alarmline Digital operates by melting the internal insulation at a
predetermined temperature, this results in the conductors short circuiting which provides a fire alarm signal. Fire and Fault conditions are provided by continuously monitoring for a short circuit (Fire) or an open circuit (Fault) state by the fire alarm panel.
For more information about the Kidde Alarmline system please click here
or call SenseTek at +31(0)20 6131611