(not available anymore)
The Stratos-Nano is designed to provide reliable aspirating smoke detection in a small, easy to install package. The detector is supplied in an ABS enclosure. An internal DIL switch enables simple on-site programming without the need for a special programmer or laptop PC. ClassiFire® Perceptive Artificial Intelligence ensures that the detector operates at optimum sensitivity for the protected environment, without the need for complex setup. This means the product will configure itself to provide high sensitivity in a small room or reduced sensitivity in a smoky area. Volt free contacts ensure compatibility with any fire alarm system.
The Stratos-Nano is designed to bring the benefits of laser based Aspirating Smoke Detection to applications where cost would previously have limited installations to ‘point detector in a fan box’ type systems. High sensitivity provided by laser based forward light scatter for reliable early warning. Laser smoke sensor chamber specially designed for aspirating detection avoids the airflow problems associated with ‘point-in-a-box’ type solutions Up to 50m of sampling pipe with 10 sampling holes. Unwanted alarms from dust are avoided using patented Dual Technology LDD 3D3 Laser Dust Discrimination and elimination system.
- Easy commissioning without the need for a PC
- Programming via internal DIL switches
- Input relay to monitor power supply or engage ClassiFire Overide
- EN54 Part 20 approved
- Prison cells
- Plant rooms
- Wind generators
- Equipment cabinets
- Ceiling voids
- Heritage property
- Critical equipment
- Anti-smoking enforcement
- Motor rooms
- Network data bus RS485 (requires the additional A30720 communication card)
- Command Module available for central monitoring and display
- SenseNet compatible – up to 127 detectors per loop
- Remote Display units available
- Suitable for Stratos-MatrixScan, a patented software system which provides virtual addressable location detection – eg 10 physical detectors would provide up to 45 unique addressable locations
The Stratos Nano is also known as Autrosense Nano, Senator Nano, Firelink Nano, Lasersense Nano.
The replacement dust filters A30755 for the LaserSense, Autrosense, Senator, Firelink, AIR-Intelligence, Lasersense or Mistral are all available.
Stratos Nano or with any other discription is not available anymore. This system is replaced by the Stratos Micra 10.
For more information about the cancellation of the Nano or its replacement the Micra 10,
email us at firstname.lastname@example.org or just call SenseTek +31(0)20 6131611