Stratos-HSSD aspirating systems
A fire often has serious consequences. Not only because of the direct costs due to loss of property, but also because of the possible indirect costs that arise because the continuity of the business is at stake. In order to minimize such effects, a fast and reliable detection of an incipient fire is very important on the ambient conditions.
Smoke detection is the most common way of fire detection. However, the known smoke detectors have a number of limitations which limits their use. Aspirating Systems do not have those restrictions so that they are able to be used in a much wider scope. Aspirating systems are smoke detection systems that are equiped with a system of pipes through which air is drawn. This air is lead to a centrally placed laser detector where the intake air is tested for the presence of smoke. Due to the central location of the detection, aspirating systems can be well utilized to monitor in locations that are not freely accessible or where the installation parts are hard to reach.
When aspirating systems were initially designed, these could be used in very clean environments only as they were not able to distinct smoke from dust. Stratos aspirating systems are equipped with a laser based detector and several intelligent inventions which make it possible to apply these systems in a very wide range of areas, from clean rooms to waste bunkers. All Stratos detectors are equipped with the patented artificial intelligence system ClassiFire – 3D3 . This system makes it possible for the detector to be optimized for the space to be monitored so that the highest sensitivity is achieved and the risk of unwanted alarms remains limited to a minimum.
All Stratos detectors are equipped with the patented Bypass principle that only lets 5-10 % of all the air drawn through the piping system to pass through the detection chamber. With this technique the system gets much less polluted than competitive products making the Stratos detectors well suited for use in heaviliy polluted area’s as well.
By adding extra dust and humidity filters Stratos systems can easily be used in damp areas such as cold rooms and areas with an open connection to the outside, where the weather could have a negative impact.
Partnumbers for the Stratos Aspirating Smoke Detection Systems
30621 Stratos HSSD 2 standard detector
30620 Stratos HSSD 2 detector incl Command Module
30624 Stratos Command Module
30671 Stratos Micra 25
30672 Stratos Micra 100
30719 Stratos Nano
30731 Stratos Ex detector
Aspirating Smoke Detection System Accessories
30624 Stratos Command Module
30436 Relay/Input card
30430 APIC card – Apollo protocol
30720 Nano communication card
30438 APIC card – Hochiki protocol
30433 APIC card – Notifier protocol
30803 RDU Relay board
30802 Stratos Remote Display Unit (RDU)
30250 SenseNET Software with license dongle
30419 Stratos Serial cable
Spare parts – Filters
30095 Stratos Quadra replacement filter
30755 Micra/Nano filter
30699 HSSD2 filter
30072 HSSD MK1 & Ex filter
Spare parts – Stratos Micra 25/100
30750 Replacement Stratos Micra 25 detector without the docking station
30753 Stratos Micra 25 docking station
30740 Replacement Stratos Micra 100 detector without the docking station
30742 Stratos Micra 100 docking station
Spare parts – Stratos HSSD 2 detectors
30698 Stratos HSSD 2 detector head assembly
30697 Stratos HSSD 2 Main PCB
30696 Stratos HSSD 2 display
30695 Stratos HSSD 2 flow sensor PCB
30058Stratos HSSD 2 high efficiency aspirator unit
Spare parts – Stratos Command Module
30690 Command Module main PCB
30691 Command Module display
Many Spare parts and filters are directly available and can be delivered within a few days. You can use these spare parts also for the following brands:
AutroSense Nano, AutroSense Micra 25, AutroSense Micra 100, AutroSense 200
Senator Nano, Senator 25, Senator 100, Senator 200
Firelink 25, Firelink 100, Firelink 400
AIR-Intelligence ASD-160, AIR-Intelligence ASD-320, AIR-Intelligence ASD-640
LaserSense Nano, LaserSense 25, LaserSense 100, LaserSense HSSD2
ZLSS1 LaserSense 25, ZLSS2 LaserSense 100, LaserSense ULTRA
Mistral 50, Mistral 100, Mistral 200
If you have any further questions, please do not hesitate to contact us by email email@example.com or call us at +31(0)20 6131611.
Using RS485 wiring Stratos detectors can be placed in a network called SenseNET. The SenseNET network provides the ability to program and monitor all paired detectors from a central location.